Xerox WorkCentre 4118, System Administration Manual

Page: 70 / 123

Page 7-8 Xerox WorkCentre 4118 System Administration Guide
Netwo
rk In
stal
lation Using Inter
net Ser
v
ices
AppleTalk
Use these instructions to install the WorkCentre 4118 on an AppleTalk network using
CentreWare Internet Services .
Installation Procedure
There are two stages required to install the device on an AppleTalk network using CentreWare
Internet Services :
¾
Configure the WorkCentre 4118
This procedure explains how to use CentreWare Internet Services to
configure the device.
¾
Test Print
A print job should be submitted to ensure the device has been installed and
configured correctly.
Configure the WorkCentre 4118
To complete the installation of the WorkCentre 4118 , perform these steps:
¾
Enable CentreWare Internet Services (see “Enabling Internet Services” on page 7-5 ).
¾
At the CentreWare Internet Services Home Page for the WorkCentre 4118 , select the
[Properties] tab.
¾
Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and
then select the [+] symbol to the left of the Protocols folder.
¾
In the Properties frame, within the Protocols folder, select [AppleTalk].
¾
Make the following selections and settings in the AppleTalk Physical Configuration section
of the Protocols frame:
Select the checkbox to enable AppleTalk .
Enter the [Printer Name]. Use a meaningful name, such as the location of the
device.
Choose the Zone where the printer resides from the drop-down menu.
¾
Click the [Apply] button to implement any changes.
1
2
4
5
6
7