Xerox WorkCentre 4118, System Administration Manual

Page: 29 / 123

Xerox WorkCentre 4118 System Administration Guide Page 3-5
Ne
tWar
e
Test Print
To ensure the WorkCentre 4118 has been installed on the network correctly a test print should
be submitted from a client workstation. Perform the following steps:
¾
Ensure the print driver is installed on every workstation that will be sending jobs to the
device.
¾
Open a document on a client workstation.
¾
Select the WorkCentre 4118 as the printer for sending documents to.
¾
Print the document on the device and verify that it prints correctly.
¾
Repeat the test for all workstations that will be sending jobs to the device.
If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures.
1
2
3
4
5