Xerox WorkCentre 4118, System Administration Manual

Page: 15 / 123

Xerox WorkCentre 4118 System Administration Guide Page 2-3
Bas
ic Netw
ork Ins
tallation
Ethernet Port
The Ethernet port is the default interface used on the WorkCentre 4118 .
NOTE: The Ethernet port cannot be disabled.
Ethernet Port Setup
If the speed setting of the Ethernet port needs to be changed perform the following steps:
¾
Connect the device to the network outlet or cable.
¾
Press the [Machine Status] button.
1
2
3
¾
Press or until System
Admin Tools displays and press
[Enter].
¾
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
4
¾
Press or until Network
Setup displays and press [Enter].
System Admin Tools
[Network Setup]
5
¾
Press or until C onfigure
Network displays and press
[Enter].
¾
Press or until Ethernet
displays and press [Enter].
Config. Network
[Ethernet]