Page 6-4
Xerox WorkCentre 4118 System Administration Guide
Advanced TCP
/IP
Set
u
p
NOTE:
While you can change the port number at which the
WorkCentre 4118
will
accept LPR print jobs, it is recommended that you do this ONLY with extreme
caution as most LPR spoolers are set to send print jobs to the default port number,
515. To change Port number see
“Using CentreWare Internet Services” on page 7-
3
.
6
6
¾
Press
or
until
TCP/IP
displays and press [Enter].
Config Network
[TCP/IP]
7
¾
Press
or
until
Manual
displays and press [Enter].
TCP/IP
[Manual]
8
¾
Press
or
until
LPD/LPD
displays and press [Enter].
Manual
[LPD/LPD]
9
¾
To enable or disable
LPD/LPD
,
press
or
until the
required setting, [Enable] or
[Disable] displays, enter the port
number using the keyboard and
press [Enter].
LPD/LPD
[Enable]
Summary of Contents for WorkCentre 4118
