Xerox WorkCentre 4118, System Administration Manual

Page: 19 / 123

Xerox WorkCentre 4118 System Administration Guide Page 2-7
Bas
ic Netw
ork Ins
tallation
Network Communication Setup
Automatically setting TCP/IP Addresses
At the WorkCentre 4118 , perform these steps:
¾
Ensure the Ethernet Port has been configured (see “Ethernet Port” on page 2-3 ).
¾
Press the [Machine Status] button.
6
¾
Press or until Setup
displays and press [Enter].
¾
To enable TCP/IP, press or
until Enable displays and
press [Enter]. Otherwise select
Disable and press [Enter].
TCP/IP
[Setup]
1
2
3
¾
Press or until System
Admin Tools displays and press
[Enter].
¾
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
4
¾
Press or until Network
Setup displays and press [Enter].
System Admin Tools
[Network Setup]