Xerox VersaLink C405dn, User Manual

Page: 46 / 272

a. In the list of available Wi-Fi networks, touch the required network.
Note: If the required Wi-Fi network is not listed, or if the required network uses WPS,
configure the connection manually. For details, refer to step 6.
b. If needed, to log in to the network, type the password.
c. To select a Wi-Fi frequency band, touch Wi-Fi Band , then select an option.
Note: The Wi-Fi frequency band is set to AUTO by default.
d. Touch OK .
6. To connect manually to a Wi-Fi Network:
a. Touch Manual Setup .
b. In the first field, type a name for the Wi-Fi network, then touch Enter .
c. Touch Network Type , then select an option.
d. Touch Security , then select an option.
e. Touch Wi-Fi Protected Setup (WPS) , then select an option.
Note: For a WPS setup with a Push Button Connection (PBC), select PBC .
f. Touch OK .
C Coonnffiigguurriinngg tthhee PPrriim maarryy N Neettw woorrkk aatt tthhee C Coonnttrrooll PPaanneell
You can set the primary network connection type at the device control panel.
Note:
• A Primary Network setup is required only if the optional Wi-Fi network connection kit is
installed and enabled.
• By default, without a Wi-Fi network connection, the primary network is set to Ethernet.
When the kit is installed and enabled, the device acquires two network connections. One
network connection is primary, and the other network connection is secondary.
• The following features are available only over the primary network connection:
– IPsec
– SMTP
– SNTP
– WSD scan
– Scan to SFTP, Scan to SMB, Scan to Email
– LDAP
– UPnP discovery
– ThinPrint
– EIP Web Service
46 Xerox ® VersaLink ® C405 Color Multifunction Printer
User Guide
Getting Started