![background image](http://html2.mh-extra.com/html/xerox/phaser-6121mfp/phaser-6121mfp_service-manual_4154850132.webp)
3-26
Phaser 6121MFP Service Manual
Error Messages and Codes
Transmission Errors
The transmission error before “Phase-B” performs redial according to the redial
interval of each country and the number of times.
The transmission error after “Phase-C” performs redial only one time. Transmission
is canceled when an error occurs again.
For information on the acronyms in the illustration above, see “Common Fax
Transfer Commands” on page 4-11.
Code
Possible Causes of Error
0080
Cannot detect a G3 signal within 35 seconds specified by ITU-T in
phase B.
0081
Received DTC signal in transmission phase.
0082
Transmitting unit receives a signal other than DIS or DTC and DCN in
phase B.
0083
Detected FSK signal, but did not receive any signal within 35 seconds.
0084
Detect DCN signal in phase B.
0085
Transmitting unit sending DCS 3 times consecutively, but each time
responds with DIS/DTC.
0086
Detected responds signal other than DTC, DIS, FTT, DCN or CFR after
sending DCS.
0087
Training attempt has failed because speed of the unit can not adjust
to lower speed.
0088
Received DCN signal after sending out DCS signal.
008B
Receiver’s protocol of DIS is received, but it is not compatible with this
machine.
s6121mfp-374
CNG
CED
DIS (CSI)
TCF
(TSI) DCS
CFR
At EOM TX
At MPS TX
PIX DATA
EOP or (MPS)
or (EOM)
MCF
DCN
At EOM RX
At MPS RX
A
B
C
D
E
Summary of Contents for PHASER 6121MFP
