Xerox DocuColor 7000 Operator'S Manual Download Page 95

Page: 95 / 194

DocuColor 8000/7000 Operator Manual

3-21

3. Accessories

Clear Bypass area jam

Perform the following steps to clear the HCS80 jam in the Bypass

area and resume printing.
1. Remove any paper from the Top Tray.
2. Lift the HCS80

Top Cover

3. Lift the green handle, or handles, indicated on the UI and

remove all paper in the Bypass area. Remove paper only from

the areas indicated.

4. Close each green handle.
5. Close the HCS80

Top Cover.

6. If the UI indicates there is a jam in the digital press, follow the

instructions on the screen to remove any paper in the area

indicates. Refer to the

Jam Clearance

section in the

Problem

Solving

chapter in this manual.

7. Follow the instructions displayed on the digital press UI to

resume printing.

Summary of Contents for DocuColor 7000



































































































































































































Search results

Summary of Contents for DocuColor 7000

Reviews:

Related manuals for DocuColor 7000

Brands by name

Popular brands

Xerox DocuColor 7000, Operator'S Manual

Search results

Summary of Contents for DocuColor 7000

Reviews:

Related manuals for DocuColor 7000

Brands by name

Popular brands