Xerox DocuColor 7000 Operator'S Manual Download Page 126

Page: 126 / 194

DocuColor 8000/7000 Operator Manual

3-52

3. Accessories

Ordering and Loading Staples

You can order new staple cartridges through the system you

normally use for ordering Xerox supplies. The cartridge number to

order is 8R12799. You should keep a supply on hand so

production is not interrupted while you are waiting for staples to be

shipped.

Open the front door of the stacker/stapler.

Push the Lever 1 down with your left hand. Grasp the

handle on the cartridge unit and pull it towards you until it

stops. Release the lever and the unit will lock into place.

Grasp the staple cartridge (2) and pull it towards you. The

entire unit will move forward, then the staple cartridge only

will pull free of the unit.

Insert a new cartridge into the unit, and push it until you

hear it click into place.

Push the yellow lever down and the cartridge unit

automatically swings back into place.

Handle

Summary of Contents for DocuColor 7000



































































































































































































Search results

Summary of Contents for DocuColor 7000

Reviews:

Related manuals for DocuColor 7000

Brands by name

Popular brands

Xerox DocuColor 7000, Operator'S Manual

Search results

Summary of Contents for DocuColor 7000

Reviews:

Related manuals for DocuColor 7000

Brands by name

Popular brands