Xerox DocuColor 7000 Operator'S Manual Download Page 176

Page: 176 / 194

DocuColor 8000/7000 Operator Manual

6-22

6. Maintenance

KEY POINT:

Vigorously shake and/or slap the new cartridge with

your hand until the Dry Ink/Toner is completely loosened. To

determine if the material is loose, place your finger tips on the flat

side of the gear cogs at the back of the cartridge and turn the gear

clockwise. When the gear turns freely, the material is loose and

the cartridge can be inserted into the compartment.

6. To insert the cartridge into the compartment, align the arrow on

the cartridge with the unlocked padlock on the compartment

and slide the cartridge into the compartment.

CAUTION:

If more than one cartridge needs to be replaced at

the same time, ensure that the cartridges are replaced in their

correct color locations. From left to right, the cartridge colors are

black, cyan, magenta, and yellow.
7. Rotate the cartridge clockwise until the arrow on the cartridge

is aligned with the locked padlock on the compartment.

8. Close the Dry Ink/Toner compartment.

Summary of Contents for DocuColor 7000



































































































































































































Search results

Summary of Contents for DocuColor 7000

Reviews:

Related manuals for DocuColor 7000

Brands by name

Popular brands

Xerox DocuColor 7000, Operator'S Manual

Search results

Summary of Contents for DocuColor 7000

Reviews:

Related manuals for DocuColor 7000

Brands by name

Popular brands