Xerox DocuColor 7000 Operator'S Manual Download

Page: 109 / 194

DocuColor 8000/7000 Operator Manual

3-35

3. Accessories

Jam Clearance

A paper jam in the HCSS80 is indicated by a message on the

digital press Touch Screen. The HCSS80 Control Panel display

illuminates the area where the jam has occurred.

Read the following steps for more information on how to clear a

jam.
1. Open the HCSS80 Front Door. There are three possible jam

areas as indicated in the photo above. Handle one moves

down, handle two moves to the right, and handle three moves

up.

2. Remove all jammed paper only from the area indicated on the

Touch Screen and the HCSS80 Control Panel Display. Do not

remove paper from any other areas.

3. Reposition the handle.
4. Close the HCSS80 Front Door.
5. Follow any instructions on the Touch Screen to restart your

print job.

Summary of Contents for DocuColor 7000



































































































































































































Search results

Summary of Contents for DocuColor 7000

Reviews:

Related manuals for DocuColor 7000

Brands by name

Popular brands

Xerox DocuColor 7000, Operator'S Manual

Search results

Summary of Contents for DocuColor 7000

Reviews:

Related manuals for DocuColor 7000

Brands by name

Popular brands