Xerox DocuColor 7000, Operator'S Manual

Page: 135 / 194

DocuColor 8000/7000 Operator Manual
4-5
4. Problem solving
Problem Suggested Solution
Excessive paper curl
(continued).
Paper curl may be a result of an attempt to print on thicker paper or on
paper stock that is less sensitive to moisture.
It is difficult to perform
secondary operations on the
output prints, such as writing
on them or using adhesives.
This problem is caused by the oil used in the fusing process. The problem
can be reduced or eliminated by setting the prints aside for one or two
hours before performing a secondary operation on them. Rubbing the print
surface with a soft, clean cloth or eraser may also help.