manualshive.com logo in svg

Xerox DocuColor 7000, Operator'S Manual

Share
Download
Xerox DocuColor 7000 Operator'S Manual Download Page 130

DocuColor 8000/7000 Operator Manual

3-56

3. Accessories

NOTE: To undock the stacker/stapler from the digital press, reach 
into the circular area near the bottom of the stacker/stapler for the 
Undocking Lever. Refer to the picture below.

Pull the lever toward you and hold it in position while moving the 

stacker/stapler a small distance (25.4mm, 1in.) away from the 

press. Release the lever and continue to move the stacker/stapler 

as far as required.

Loss of Power

If power is interrupted to the stacker/stapler:
•

Ensure the power cord is plugged in to the proper wall 

receptacle.

•

Ensure that the digital press power is on.

•

If the power has not been restored by the above procedure, 

call Xerox Customer Support.

Also call your Xerox service representative if the loss of power to 

the stacker/stapler seems to be frequent or excessive.

Location of Undocking Lever

Summary of Contents for DocuColor 7000



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands