manualshive.com logo in svg

Xerox DocuColor 7000, Operator'S Manual

Share
Download
Xerox DocuColor 7000 Operator'S Manual Download Page 125

DocuColor 8000/7000 Operator Manual

3-51

3. Accessories

Jam Clearance

A paper jam in the stacker/stapler is indicated by a message on 

the digital press UI. The stacker/stapler Control Panel display 

illuminates the area where the jam has occurred.

Read the following steps for more information on how to clear a 

jam.
1.

Open the stacker/stapler Front Door. There are three 

possible jam areas as indicated in the photo above. Handle 

1 moves down, Handle 2 moves to the right, and handle 3 

moves up.

2.

Remove all jammed paper only from the area indicated on 

the UI and the stacker/stapler Control Panel Display. Do not 

remove paper from any other areas.

3.

Reposition the handle.

4.

Close the stacker/stapler Front Door.

5.

Follow any instructions on the UI to restart your print job.

1

2

3

Summary of Contents for DocuColor 7000



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands