Xerox Color J75 Press User Manual Download

Page: 262 / 318

Staple jams in the standard staple cartridge

Note

Always check inside the finisher for any individual staples or staple remnants.

1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.

3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge

from the finisher.

4. Check the inside of the finisher for any remaining staples, and if necessary, remove

them.

5. Open the staple cartridge unit as shown and remove the jammed staple.

Warning

To avoid injury to your fingers, carefully remove the jammed staples from the
cartridge.

Xerox

Color J75 Press

15-34

User Guide

Standard/Booklet Maker Finisher

Summary of Contents for Color J75 Press































































































































































































































































































































Search results

Summary of Contents for Color J75 Press

Reviews:

Related manuals for Color J75 Press

Brands by name

Popular brands

Xerox Color J75 Press, User Manual

Search results

Summary of Contents for Color J75 Press

Reviews:

Related manuals for Color J75 Press

Brands by name

Popular brands