manualshive.com logo in svg

Xerox Color J75 Press, User Manual

Share
Download
Xerox Color J75 Press User Manual Download Page 306

013-240

Cause:  Jam or communication error with the SquareFold Trimmer Module

Remedy:  Perform the following:

1.

Power off/on the machine.

2.

If fault persists, call for service.

013-241

Cause:  Jam or communication error with the SquareFold Trimmer Module

Remedy:  Perform the following:

1.

Power off/on the machine.

2.

If fault persists, call for service.

013-242

Cause:  Jam or communication error with the SquareFold Trimmer Module

Remedy:  Perform the following:

1.

Power off/on the machine.

2.

If fault persists, call for service.

013-243

Cause:  Jam or communication error with the SquareFold Trimmer Module

Remedy:  Perform the following:

1.

Power off/on the machine.

2.

If fault persists, call for service.

013-246

Cause:  Jam or communication error with the SquareFold Trimmer Module

Remedy:  Perform the following:

1.

Power off/on the machine.

2.

If fault persists, call for service.

013-303

Cause:  A top cover is open or a jam/fault occurred with the SquareFold Trimmer Module

Remedy:  Perform the following:

1.

Open the Top Left and Right Covers of the SquareFold Trimmer Module.

2.

Carefully remove all sheets and paper scraps from jam clearance areas.

3.

Close the SquareFold Trimmer Module Top Left and Right Covers.

4.

Check the Trimmer Waste Container:

• If full, empty the container and reinsert it into the SquareFold Trimmer Module.

• If the container is partially pulled out, push it completely in.

Xerox

®

 Color J75 Press

16-24

User Guide

SquareFold Trimmer Module

Summary of Contents for Color J75 Press































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands