Xerox Color J75 Press User Manual Download Page 258

Page: 258 / 318

5. Return unit 4 to its original position.

6. Close the Right Cover on the finisher.

Note

A message will display and the machine will not operate if the right cover is open
even slightly.

Paper jams at finisher top tray

1. Make sure that the machine has stopped printing.
2. Remove jammed paper from the finisher top tray.

Note

If paper is torn, check inside the machine and remove it.

Xerox

Color J75 Press

15-30

User Guide

Standard/Booklet Maker Finisher

Summary of Contents for Color J75 Press































































































































































































































































































































Search results

Summary of Contents for Color J75 Press

Reviews:

Related manuals for Color J75 Press

Brands by name

Popular brands

Xerox Color J75 Press, User Manual

Search results

Summary of Contents for Color J75 Press

Reviews:

Related manuals for Color J75 Press

Brands by name

Popular brands