manualshive.com logo in svg

Xerox Color J75 Press, User Manual

Share
Download
Xerox Color J75 Press User Manual Download Page 47

• Original Size
• Edge Erase
• Image Shift
• Image Rotation
• Invert Image
• Original Orientation

Book Copying

Bound originals (such as books) can be placed on the document glass to make 1-sided
or 2-sided copies. The bound original should be placed face down and registered to the
rear left corner of the document glass. Align the top of the bound original against the
rear edge of the document glass.

Book Copying options include:

Both Pages

Copies both pages in page order.

Left Page Only

Copies the left page only.

Right Page Only

Copies the right page only.

Binding Edge Erase

This option erases or deletes the shadow from your copies that is caused by the center
binding of the bound original.

5-11

Xerox

®

 Color J75 Press

User Guide

Copy

Summary of Contents for Color J75 Press































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands