manualshive.com logo in svg

Xerox Color J75 Press, User Manual

Share
Download
Xerox Color J75 Press User Manual Download Page 267

7. Detach the outside staples along the line.

8. Push a new staple cartridge into the unit.

9. Reinstall the cartridge unit to its original position in the finisher.

10. Close the Right Cover on the finisher.

Note

A message will display and the machine will not operate if the right cover is open
even slightly.

Fault codes

If an error caused the printing to end abnormally, or a malfunction occurred in the
Booklet Maker Finisher, then an error code is displayed.

If an error code appears that is not listed in the table below, or if an error persists after
following the listed solution, then contact your Xerox Customer Support Center.

If an error code is displayed, all print data of the machine as well as print data stored
in the machine’s built-in memory is discarded.

012-125

Cause:  The finisher malfunctioned.

15-39

Xerox

®

 Color J75 Press

User Guide

Standard/Booklet Maker Finisher

Summary of Contents for Color J75 Press































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands