Xerox Color J75 Press User Manual Download

Page: 181 / 318

078-260

Cause: An OHCF tray has malfunctioned.

Remedy: Perform the following:

Check the paper loaded in the trays.

Power Off/On the machine.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-261

Cause: An OHCF tray has malfunctioned.

Remedy: Perform the following:

Check the paper loaded in the trays.

Power Off/On the machine.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-262

Cause: An OHCF tray has malfunctioned.

Remedy: Perform the following:

Check the paper loaded in the trays.

Power Off/On the machine.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-263

Cause: An OHCF tray has malfunctioned.

Remedy: Perform the following:

Check the paper loaded in the trays.

Power Off/On the machine.

If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-264

Cause: An OHCF tray has malfunctioned.

12-21

Xerox

Color J75 Press

User Guide

Oversized High Capacity Feeder (OHCF), 1 or 2 trays (Trays 6/7)

Summary of Contents for Color J75 Press































































































































































































































































































































Search results

Summary of Contents for Color J75 Press

Reviews:

Related manuals for Color J75 Press

Brands by name

Popular brands

Xerox Color J75 Press, User Manual

Search results

Summary of Contents for Color J75 Press

Reviews:

Related manuals for Color J75 Press

Brands by name

Popular brands