Xerox Color J75 Press User Manual Download Page 180

Page: 180 / 318

• If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-101

Cause: An OHCF tray has malfunctioned.

Remedy: Perform the following:

• Check the paper in the malfunctioning tray.

• Power Off/On the machine.

• If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-101

Cause: An OHCF tray has malfunctioned.

Remedy: Perform the following:

• Check the paper in the malfunctioning tray.

• Power Off/On the machine.

• If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-210

Cause: An OHCF tray has malfunctioned.

Remedy: Perform the following:

• Check the paper setting of the paper trays and power Off/On the machine.

• If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

078-211

Cause: An OHCF tray has malfunctioned.

Remedy: Perform the following:

• Check the paper setting of the paper trays and power Off/On the machine.

• If problems persist, contact the Customer Support Center.

Note

Trays other than the OHCF trays may be used in the interim.

Xerox

Color J75 Press

12-20

User Guide

Oversized High Capacity Feeder (OHCF), 1 or 2 trays (Trays 6/7)

Summary of Contents for Color J75 Press































































































































































































































































































































Search results

Summary of Contents for Color J75 Press

Reviews:

Related manuals for Color J75 Press

Brands by name

Popular brands

Xerox Color J75 Press, User Manual

Search results

Summary of Contents for Color J75 Press

Reviews:

Related manuals for Color J75 Press

Brands by name

Popular brands