Xerox 2101, User Manual, Page: 399 / 444

369
Tr
oubleshooting
9.5
Solving Curled Output
You can correct the curling of output by pressing the De-curl button.
This feature is used only when the output is curled upward.
The De-curl button functions both in suspension and in operation if the power of the this machine is on.
The curling may be reversed by reloading the paper upside down if the output is curled downward.
●
If the output copy is curled downward, the De-curl button will not function even if it is pressed.
●
To change the curling correction mode among Auto, ON, and OFF, press the De-curl button on the finisher, not the Reset button
on the control panel, while the machine is in operation. The change will be applied immediately after the De-curl button is
pressed.
Procedure
1
Check that De-curl lights
up.
When turning on the power of this
machine, the de-curl mode is set
to
Auto .
2
Press De-curl .
Pressing the De-curl button toggles the mode between Auto, ON , and OFF .
Refer to “Modes and functions of De-curl button” for details.
●
● If the power saver mode is canceled,
the curling correction mode is set to
Auto .
Auto
ON
OFF