Xerox 2101, User Manual, Page: 334 / 444

304
System Administrator Mode Settings
8.3
Setting Tools Mode
This section explains how to specify the Tools Mode setting.
8.3.1
Changing Tools Mode Settings
The following procedure explains how to specify basic Tools Mode settings, using the default values
of the features as an illustration. Use the same procedure to specify other settings not mentioned
here. For information on specifying the Tools password, refer to the other procedures/sections
following this.
“8.3.2 Changing Tools Password”
Procedure
1
Display the Tools Mode screen.
2
Select Copy Defaults .
The Feature Defaults screen is displayed.
3
Use to select the required feature.
“8.1.1 Using System Administrator
Mode”
“8.1.2 Entering/Exiting Tools Mode”
●
You can also directly select a feature
by touching it on the display. Also,
you can touch
Previous Page or
Next Page to display the previous/
next screen.