Xerox 2101, User Manual, Page: 239 / 444

6.3 Saving Data
209
Server
5
Press Start on the control panel.
The scanning of documents will begin.
If a Remote Link Folder is set to the folder:
When you specify one of folders 1 to 29 where the remote link folder is set, the
following screen appears.
If multiple copy destinations are registered in the folder, you have to specify the
setting for the destination each time
Start is pressed.
(1)Select On to print the file automatically at the linked
machine.
(2)Select On to save the file at the linked machine.
If Off is selected, the file is deleted after printing.
(3)When specifying the number of prints for output at the
linked machine, select Enter .
If Enter is not selected, the number of prints is changed.
(4)Enter the number of prints by using the keypad, and select
Enter .
The number entered is set.
(5)Press Start .
The scanning of documents will begin.
Once the copy file has been saved in an storage folder, the same file is also
copied into the remote linked folder.
If the Auto Print function is enabled at the shared folder, multiple machines can
print the same data simultaneously.
In Copy and Save mode, the machine starts to automatically transfer the file to
the remote linked folder at the completion of document scanning.
“6.2.2 Setting Storage Folders”