XCMG QAY220, Operation Manual, Page: 56 / 172

QAY220 All Terrain Crane Operation Manual
4-2
Fig. 4-2 Starting switch
Fig. 4-1 Location of main power switch
Turn on the main power switch first, and
then insert the starting key into the starting
switch, and turn it clockwise to position
Ⅰ
to turn
on power source. Depress accelerator pedal to
proper position (about a quarter of its stroke) and
further turn the key to position
Ⅱ
, and then the
engine may be started. Return the key to position
POWER if the engine cannot be started within 12
seconds. The engine starting interval between two
attempts is not less than 2 minutes.
If the engine can
’
t be started for
3 attempts, stop starting and check the
causes.
4-1-1 Starting engine
Crane operation
Chapter 4
Courtesy of CraneMarket.com