Xantrex Trace SW4024, Installation Manual

Page: 16 / 56

2.0 INSTALLATION
10
© 2002 Xantrex Technology Inc.
P/N 975-0041-01-02 Rev A 03/02
Wiring (continued)
AC Wiring for Single-Inverter Installations (continued)
Ground Wiring
Note: Ground wiring must be established at each unit.
Ground wiring can also be accomplished in a variety of
ways. The following instructions describe only one
method. Please consult your local electrician for specific
wiring details pertaining to your installation.
1. Connect a wire from the ground bus in the main service panel to the
ground lug in the GTI.
2. Connect a wire from the ground bus in the main service panel to the
ground terminal in the inverter.
3. Connect a wire from the ground bus in the main service panel to the
ground terminal in the sub-panel.
See Figure 2-5a for an illustration of ground wiring for a single-inverter
installation with the GTI.