Xantrex Trace SW4024, Installation Manual

Page: 47 / 56

© 2002 Xantrex Technology Inc.
P/N 975-0041-01-02 Rev A 03/02
A-1
APPENDIX A – SPECIFICATIONS
ELECTRICAL SPECIFICATIONS 1
Utility Interactive Protection Over/under AC voltage and frequency
detection plus active islanding detection
AC Voltage (Nomimal) 120 VAC
AC Voltage (Allowed)
Utility Interactive Mode 106 - 132 VAC
Bypass mode/”Buy” Current 80-149 VAC
Input Frequency (Allowed)
Utility Interactive Mode 59.3 - 60.5 Hz
Bypass Mode/”Buy” Current 53.0 - 67.0 Hz
AC Current (Allowed) (@ 25°C)
Utility Interactive Mode 40 amps continuous
Bypass Mode/”Buy” Current 60 amps continuous
Total Output Harmonic Distortion
Rated <5% at rated power
Typical 2.5% at rated power
MECHANICAL SPECIFICATIONS
Enclosure Type Indoor, ventilated, steel chassis with
white, powder-coat finish
Unit Weight 26 lb (15.9 kg)
Dimensions (H x W x D) 6.3" x 21" x 7"
(16 cm x 53.3 cm x 17.8 cm)
Mounting wall mount in a horizontal position only
AC Input/Output Terminals Sized for #2-#14 AWG wires
Neutral Bar Sized for #6 AWG wires
Conduit Sizes Dual ¾" - 1" and ½" - ¾" knockouts
Specifications @ 25 °C
Specifications subject to change without notice.
1 All electrical specifications are based on the unit operating
in the Utility Interactive Mode (SELL Mode selected)
unless otherwise specified.