Xantrex Trace SW4024, Installation Manual

Page: 4 / 56

iv
© 2002 Xantrex Technology Inc.
P/N 975-0041-01-02 Rev A 03/02
SAVE THESE INSTRUCTIONS
• The unit contains more than one live circuit (inverter and utility grid). Power
may be present at more than one source.
• This product contains no user-serviceable parts. Do not attempt to repair this
unit.
• To reduce risk of electric shock, disconnect all wiring before attempting any
maintenance or cleaning.
• Do not mount this device in unventilated enclosures.
• To reduce risk of electric shock, disconnect all wiring before attempting any
maintenance or cleaning.
• Additional AC disconnects may be required as part of the system installation.
Consult local and national electrical code requirements.
• This unit is designed to be horizontally wall mounted.
• The AC input and output neutral conductors are not connected (bonded) to
the chassis.
• The AC input and output HOT conductor are not isolated from each other.
• The chassis housing of the GTI must be connected to a permanent grounding
system as required by the National Electric Code, ANSI/NFPA 70-1996. This is
the responsibility of the system installer. A grounding terminal lug is provided
for connection of an equipment grounding conductor.
• CSA certified for sale in the U.S. under Photovoltaic Power Systems (UL1741).
IMPORTANT SAFETY INSTRUCTIONS (Continued)