X-Rite 891, Operation Manual

Page: 51 / 80

C O N T R O L S T R I P O P E R A T I O N
5-5
MANUALLY TRANSMITTING STRIP DATA
The manual transmission of stored strip data can occur whenever required.
Individual strip data (actual values or deviations) or all strips that reside in
one channel can be selected for transmission.
1. Press key
lll
(xmit) located on Function Menu page (p4) to enter
Transmit screen.
FUNCTION MENU
p4 view xmit ref
NOTE:
XMIT LAST
displays after pressing key lll (xmit) if the last strip
measured is a different format than the reference previously measured in that
channel. This allows you to measure different strip formats and transmit data
without affecting the channels memory of the last 16 strip measured. Press
key
llll
(xmit) to transmit strip data. Press key
l
(chan) to go to next view
menu.
2. Press key
l
(chan) to select control strip channel for transmitting. Press
key
llll
(go>) to select actual strip data, or press key
lll
(dev) and then
press key
llll
(go>) to select deviation strip data.
XMIT pap k:RA—4
chan ref dev go
>
NOTE:
CHANNEL IS EMPTY
appears in the display if no control strip data
is available in the selected channel.
3. Select strip to transmit.
•
Previously measured control strips are viewed by pressing key ll (<) to
go back in time, or pressing key
lll
(>) to go forward in time. Note,
pressing key
lll
(>) once more past the last control strip displays
ALL
DATA
on the instrument screen. Pressing key
l
(xmit) when this displays
causes all strips in the selected channel to be transmitted.
•
Press key
l
(xmit) to transmit selected strip data (“xmit” changes to
upper-case during transmission).
•
After transmitting data press key
llll
(time) to exit transmit screen.
10:28
<
4/15
>
pap
(
k:RA—4
)
xmit
Control strip
measurement
date and time.