X-Rite 891, Operation Manual

Page: 49 / 80

C O N T R O L S T R I P O P E R A T I O N
5-3
•
For Auxilary channels , control limit pass or violation message is
momentarily displayed followed by a Load into Channel question.
Pressing key
lll (no) allows you to view the data without loading it into
the database. Pressing key llll (yes) loads the data into memory and
indicates a time tag.
yes
LOAD INTO AUX1
CHANNEL? no
•
Time tag information momentarily appears, providing a date stamp for
the control strip measurement.
k:RA—4 TIME TAG
04/15/97 10:15
4. A control limit pass or violation message is displayed along with a View
Data question.
NOTE: If a
LIMIT EXCEEDED
message appears after a time tag, consult the
manufacturer’s processor documentation for corrective action required.
•
Pressing key
lll
(no) returns the instrument screen to the Channel Menu
display. Pressing key
llll
(yes) advances the instrument screen to the
View screen. See below for Viewing Control Strip Data.
yes
WITHIN ALL LIMITS
VIEW DATA no
View Control Strip Data
Control strip data consists of the “actual” values measured by the instrument
and deviation values from the aim strips.
Control strip data is viewed after a strip measurement or by selection from
the Function Menu.
Viewing Data after Control Strip Measurement
1. Press key llll (go>) to view channel actual measurement data, or press
key lll (dev) and then press key llll (go>) to view strip deviation data.
go
>
VIEW pap k:RA—4
chan dev ref