X-Rite 891, Operation Manual, Page: 44 / 80

S E C T I O N F O U R
4-10
TRANSMIT REFERENCE AND AIM DATA
Strip reference and aim data is available for transmission from the I/O port
“A” on the instrument. Individual channels are selected for transmission.
Transmitted reference values consist of the average values (if more than one
strip was measured) with any correction factors applied.
Transmitted aim values are the reference values with transformation rules
applied. Any adjustments that result from a crossover are also included.
1. Press key
lll
(xmit) located on Function Menu page (p4) to enter
Transmit screen.
FUNCTION MENU
p4 view xmit ref
NOTE:
XMIT LAST
displays after pressing key
lll
(xmit) if the last strip
measured is a different format than the reference previously measured in that
channel. This allows you to measure different strip formats and transmit data
without affecting the channels memory of the last 16 strips measured. Press
key
llll
(xmit) to transmit strip data. Press key
l
(chan) to go to next view
menu.
2. Press key
l
(chan) to select reference channel for transmitting. After
selecting channel, press key
ll
(ref) to select reference (“ref” changes to
upper-case when selected and “dev” changes to “aim”).
XMIT pap k:RA—4
chan ref dev go
>
3. Press key llll (go>) to select reference data, or press key lll (aim) and
then press key llll (go>) to select aims data.
XMIT pap k:RA—4
chan REF aim go
>
NOTE:
NO REF INSTALLED
appears in the display if no reference is
available in the selected channel.