X-Rite 891, Operation Manual

Page: 31 / 80

S E T T I N G S Y S T E M C O N F I G U R A T I O N
3-5
•
Press key ll or key lll to page through and select a preset options
(CUSTOM, REPORT, SPRD-SHT, k:TNetA, etc.).
•
After selecting I/O preset option, press key llll (P2) to load preset and
advance to Page 2a Configuration screen.
•
If you do not want to load a preset, press key l (P2) to advance to
Page 2a Configuration screen.
CNFG
P2 CUSTOM load
5. Page 2a Configuration Screen
•
Press key
ll
(RCI) to page through and select a remote control interface
option (OFF, ON, TTL).
•
Press key
lll
(PIN5) to page through and select a handshake option (OFF,
BUSY, and CTS).
•
Press key llll (XON) to select bi-directional transmit On/Off protocol
option. Each key depression alternates between xon (off) and XON (on).
•
After editing Page 2a Configuration options, press key l (P2a) to advance
to Page 2b Configuration screen.
CNFG
P2a RCI PIN5 XON
SAVE
6. Page 2b Configuration Screen
•
Press key ll (DPT) to select decimal point output option. Each key
depression alternates between dtp (off) and DPT (on).
•
Press key lll (COMP) to select data output format option. Each key
depression alternates between comp (off) and COMP (on).
•
Press key llll (ALF) to select automatic line feed option. Each key
depression alternates between alf (off) and ALF (on).
•
After editing Page 2b Configuration options, press key l (P2b) to
advance to Page 2c Configuration screen.
CNFG
P2b DPT COMP ALF
SAVE
7. Page 2c Configuration Screen
•
Press key ll (DEL) to select delay option. Each key depression alternates
between del (off) and DEL (on).
•
Press key lll (AXMT) to select automatic transmission option. Each key
depression alternates between axmt (off) and AXMT (on).
•
Press key llll (REF) to select reference comparison option. Each key
depression alternates between ref (off) and REF (on).