X-Rite 891, Operation Manual

Page: 29 / 80

S E T T I N G S Y S T E M C O N F I G U R A T I O N
3-3
When set to Off (xon), the instrument ignores XON/OFF codes. Note, usage
is limited to output at this point.
Page 2b Configuration Options
DPT (Decimal Point)
Controls the decimal point availability during data output. When off (dtp), no
decimal is output with data. When on (DTP), decimal points are included
with the output data.
COMP (Compact)
Varies the output format of the data. When when off (comp), data for each
color is delimited with a carriage return—or CR LF if ALF is enabled. When
on (COMP), a space and delimiter is transmitted after each set of RGB data
values.
ALF (Automatic Line Feed)
Controls the line feed availability during data output. When off (alf), no line
feed is output with data. When on (ALF), a line is included with the output
data.
Page 2c Configuration Options
DEL (Delay)
Controls a transmitted delay between each set if RGB data output. When off
(del), no delay is sent between each set of RGB data. When on (DEL), a one
second delay is sent between each set of RGB data.
AXMT (Automatic Transmit)
Controls automatic transmission of data after a measurement. When off
(axmt), no data is transmitted out the I/O port after a measurement. When on
(AXMT), data is automatically sent out the I/O after a measurement.
REF (Reference)
Controls reference comparison of data. When off (ref), measurement data is
not compared to reference data. When on (REF), measurement data is
compared to reference data. REF is automatically turned on when a reference
reading is taken.
Page 2d Configuration Options
BAUD (Rate)
Determines the data output rate (characters per second) of the I/O port “A.”
Available settings are: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, and
57600. Does not affect modem I/O port “B” baud rate.
LOCK
Controls the ability to change the configuration options. When off (lock),
configuration options are available for change. When on (LOCK),
configuration options cannot be changed. Note, an additional step is required
to change this option, refer to the following procedure for details.