X-Rite 891, Operation Manual, Page: 50 / 80

S E C T I O N F I V E
5-4
2. Press key l (D-min) to page through RGB data fields of the strip.
3. Previously measured control strips are viewed by pressing key ll (<) to
go back in time, or pressing key lll (>) to go forward in time.
4. After viewing data, continue to press key l (D-min) until the Exit screen
appears, then press key llll (yes) to exit.
10:28
<
4/15
>
0.00 0.00 0.00
D—min
Red Green Blue
Viewing Control Strip Data from Function Menu
1. Press key ll (view) located on Function Menu page (p4) to enter View
screen.
FUNCTION MENU
p4 view xmit ref
NOTE:
VIEW LAST
displays after pressing key ll (view) if the last strip
measured is a different format than the reference previously measured in that
channel. This allows you to measure different strip formats and view data
without affecting the channels memory of the last 16 strip measured. Press
key
llll (go>) to view strip data. Press key l (chan) to go to next view menu.
2. Press key l (chan) to select control strip channel for viewing. After
selecting channel, follow previously discussed steps.
VIEW pap k:RA—4
chan ref dev go
>
NOTE:
CHANNEL IS EMPTY
appears in the display if no control strip data
is available in the selected channel.
Control strip
measurement
date and time.