Operation with coin systems according to Executive standard
International L – edition: 17.02.2006
38
10.5
Reset of all counters - service program 04, button 8
Press key S four times, display shows
Press selection button 8 and hold it, display shows
Press key P. The digits 08 disappear.
All statistics counters pertaining to service programs 1 to 4 and
6 are reset.
The counter for current supply interruptions (service program 4, button 6) and that for the tube stock-
taking in service program 6, button 7/8 are not reset. The data has to be reset separately. The reset
of the counter for current supply interruptions is described in
.
ATTENTION! In case infrared data transfer according to BDTA standard is activated these counters
can not be reset manually. This will be done by the BDTA terminal
Finally leave the service program (
11
Operation with coin systems according to Executive
standard
When applying one of these coin systems, the data relating to the maximum value of change and to
the vending options have to be entered in the respective coin system.
The programming steps are described in detail in the manuals supplied by the coin system manufac-
turers. Use the coin slot to insert not less than 20 coins of each denomination into the change giver
tubes.
To delete the credit please refer to the manufacturers operating instructions.
If the coin system does not work with the IVC unit (error code77), a re-programming of the IVC unit
may be necessary (
).
Test vend:
When you wish to make a test vend, push
button "Credit" of the IVC control unit. The
test vend has no effect on the vend counters.
04 COUNTER
RESET
SELECTION:
08 =9999
SELECTION:
=9999
test
vend
