Operation with coin systems according to BDV standard
International L – edition: 17.02.2006
39
12
Operation with coin systems according to BDV standard
12.1
Filling the change tubes
Prior to filling the tubes make sure that the counters for the change tubes display 0000 (service pro-
gram 06, button 7/8). Further information can be found in
. We suggest inser-
tion of not less than 20 coins into each tube so that the display changes from "PLEASE INSERT
EXACT MONEY " or "MACHINE ACCEPTS 0.10 - 0.50 EURO" to "MACHINE ACCEPTS 0.05 - 2.00
EURO".
You can insert the coins via the standard coin slot in which case the display shows either "PLEASE
INSERT EXACT MONEY " or "MACHINE ACCEPTS 0.10 - 0.50 EURO" or "MACHINE ACCEPTS
0.05 - 2.00 EURO". The credit displayed is erased by calling up service program 1 - 10 (pressing key
S ten times).
If none of these messages "PLEASE INSERT EXACT MONEY " or "MACHINE ACCEPTS 0.10 -
0.50 EURO" or 'MACHINE ACCEPTS 0.05 - 2.00 EURO” is displayed call up service programs 1 to
10 (push key S ten times) and check machine configuration (
12.2
Display "PLEASE INSERT EXACT MONEY"
If the tube containing the lowest-denomination coin is not sufficiently full then the display shows
"PLEASE INSERT EXACT MONEY " or "MACHINE ACCEPTS 0.05 - 0.50 EURO" - message 9.
If the tube with the lowest-denomination coins is filled with some 15 coins and in addition one of the
higher-denomination tubes is filled sufficiently (i.e. 15 x 0.10 EURO, 15 x 0.20 Euro or 15 x 0.50
Euro) display changes to "MACHINE ACCEPTS 0.05 - 2.00 EURO" - message 0.
12.3
Manual coin dispense - service program 07
Press key S seven times, display shows
Press selection button 2, display shows
then
then
then
then
One coin is delivered out of each tube. If you operate selection
button 2 again, the coin pushers deliver another coin out of
each tube.
Finally leave the service program (
07 TEST PROGRAM
SELECTION:
02 =2 01
SELECTION:
02 =2 02
SELECTION:
02 =2 03
SELECTION:
02 =2 04
SELECTION:
= 07
