Programming of the machine
International L – edition: 17.02.2006
19
5
Programming of the machine
5.1
The programming terminal
The machine can be programmed by means of the selec-
tion buttons. Call up the service programs using the termi-
nal with four programming buttons inside the machine.The
four buttons of this panel control the following functions:
(S)
SERVICE
Gives you access to the various service levels.
(D)
DIGIT
Use to select single display digits during activated service
program.
(+)
PLUS
Use to set the selected digit with values between 0 and 9.
(P)
PROGRAMM
Use to save new inputs into memory.
5.2
The state ’IN OPERATION‘
Starting point is the status "IN OPERATION" indicated in the
display by message 0 (or message 9 in case the change
tubes are not yet filled, (
If the text memory is empty, message 0 will appear,
programming is still possible.
You can call up 17 service programs with the programming
terminal.
Example service program call:
!
Press button S once. Service program 01 is reached.
(see arrow)
!
Text: “01_VENDS
___PER_SELECTION” is preset from factory
(message 31).
!
If text memory is empty, the display shows:
“__.01”
(_ = space sign in reality).
NOTE: You can freely programme the LCD display. Therefore the following explanations only refer to
the service program numbers and data, which are displayed either through preset by factory or
through empty text memory
.
MACHINE ACCEPTS
0.05 - 2.00 EURO
IN OPERATION
alterning with
00.00
Message 0 factory preset
01 VENDS PER
SELECTION
text memory preset from factory
.01
empty text memory
