Operation with MDB
International L – edition: 17.02.2006
32
Programming:
Press key S ten times, display shows
Press button R (or enter selection 90) , display shows the cur-
rent option
When you wish to change the option, keep pressing key P while
entering the new digits as decribed above.
Finally leave the service program (
9.6
Coin acceptance options - Cancellation of individual coins - service program
12
Press button P - hold it - and press key S six times, display
shows
In this service program each button 1 - 8 is assigned to a coin
channel. When pushing the corresponding button the current
option is displayed. Press button C to get to the next channel.
Standard settings:
The figures displayed indicating the following:
00 -> Coin is accepted and falls into the corresponding tube.
08 -> Coin is accepted and falls straight into the cash box.
80 -> Coin is disabled or coin is not used, except of the lowest coin (value 0.05 EURO), it can not be
disabled.
09 -> Coin is accepted to the cash box even if the return tubes empty.
Programming:
Press the respective coin channel button, press
key P, hold it and enter the desired option, i.e. 80. Use two dig-
its as decribed above.
How to check:
Press key C, display shows:
Press the re-programmed button (e.g. 1), the new option (e.g.
80) should be displayed now.
NOTE: If you carry out a data block transfer in service program
11, button 1 (input 9999), the changed acceptance options are cancelled and the standard settings
are again in force.
Coin channel 1 = button 1
= 0.05 EURO display shows
= 00
Coin channel 2 = button 2
= 0.10 EURO display shows
= 00
Coin channel 3 = button 3
= 0.20 EURO display shows
= 00
Coin channel 4 = button 4
= 0.50 EURO display shows
= 00
Coin channel 5 = button 5
= 1.00 EURO display shows
= 08
Coin channel 6 = button 6
= 2.00 EURO display shows
= 08
10 VEND OPTIONS
SELECTION:
90 = 80
12 COIN OPTIONS
SELECTION:
02 = 80
coin
channel
current
option
SELECTION:
= 80
SELECTION:
= 12
SELECTION:
01 = 80
