Operation with coin systems according to BDV standard
International L – edition: 17.02.2006
40
12.4
Dispense of single tubes - service program 07
For stocktaking purposes the tubes can be individually operated as shown below:
Press key S seven times, display shows
Press key P - hold it - press selection button 2, display shows
Release both buttons.
Press button 1. Coins from the first tube will be ejected and
counted.
Press button 1 to stop ejection.
Pressing button 2, 3 or button 4 will eject coins from the second, third or fourth tube respectively.
NOTE: The program is interrupted if you touch selection button C. To call it up again keep pressing
key P and push selection button 2.
12.5
Programming maximum change - service program 08, button R
Press key S eight times, display shows
Press button R or enter selection 90 display indicates current
maximum change
To change the sum of money press key P - hold it - and enter
the desired amount in four digits, e.g. 10.00 EURO enter 1000
which is displayed
Finally leave the service program (
12.6
Programming maximum coin insertion - service program 11, button 1
If the programmed maximum coin insertion sum is exceeded, the machine rejects any insertion of
further coins.
Programming:
Press key P - hold it - press key S seven times, display shows
Press button 1, display shows (factory preset)
The maximum insertion sum is set at 90.00 EURO. If you want
to change that, press key P, hold it and enter the new desired
maximum insertion in four digits.
07 TEST PROGRAM
SELECTION:
=0000
SELECTION:
=0003
08 PRICE
PROGRAMMING
SELECTION:
90 =0500
SELECTION:
=1000
11 COIN CHANNEL
SETTING
SELECTION:
01 =9000
