4x4 HDMI 2.0 HDBaseT Matrix Switcher
10
5. Button Control
The matrix switcher can be controlled by using the buttons on the front panel.
Whenever a command is accepted, the indicators of all the buttons pressed will blink
three times then they will go off. If the command fails, the indicators will go off
immediately without blinking.
5.1 Signal Switching
l
Switch an input to an output
Operation: INPUT# + OUTPUT# + MENU/
↲
Example: Switch Input 1 to Output 2:
Press
INPUT 1
Press
OUTPUT 2
Press
to confirm.
Note:
In default status, 4 IR OUT ports correspond with 4 HDMI INPUTS. When you
switch an HDMI input, the corresponding IR OUT will be switched synchronously.
l
Switch an input to several outputs
Operation: INPUT# + OUTPUT# + OUTPUT# +… + MENU/
↲
Example: Switch Input 1 to Output 2, 3, and 4.
Press
INPUT 1
Press
OUTPUT 2
,
3
,
4
Press
to confirm.
SWITCH:1 ->
SWITCH:1 ->
2
SWITCH:1 ->
SWITCH:1 ->
2 3 4
