4x4 HDMI 2.0 HDBaseT Matrix Switcher
34
7.2 IR Pass-through Control
The matrix switcher supports bi-directional IR pass-through, allowing the devices can
be controlled by both source and destination ends. This section provides connection
and switching examples to illustrate possible configurations.
7.2.1 Control Local Input Device from Remote
The same basic principle applies when controlling the local input device from the
remote location.
l
Control local input device through IR OUT port
Example: Switch HDMI input 3 to HDBaseT output 4.
Connect an IR receiver to
IR IN
port on the receiver, then connect an IR emitter to the
IR OUT 3
on the matrix switcher. The third input source can be controlled through its
corresponding IR output port. The connection diagram shown as below:
Tx
Rx
LINK
HDCP
Receiver
Display
Remote
IR Receiver
AUDIO MATRIX OUT / ARC
IR EYE
4K Blu-Ray
IR Emitter
HDMI:
IR:
HDBaseT:
