Wolf Garten Lycos 40 M Series, Original Operating Instructions

Page: 25 / 179

Troubleshooting
25
EN
Problem Possible cause Remedy
Line adjustment
does not work.
Trimmer line spool is empty. Replace the line spool.
&XWWLQJOLQHKDVWRUQRႇDQGLVSXOOHGLQWRWKHOLQH
box.
7DNHRႇWKHOLQHVSRROLIQHFHVVDU\ZLQG
up the line again by gently pulling and
insert the spool.
Cutting line has become caught in the spool.
Cutting line is welded onto the spool.
Remove the welded on line section, if ne-
cessary wind up the line again by gently
pulling and insert the spool.
Motor does not run.
No mains supply.
Check the power supply and if necessary
contact an electrician to arrange repair.
Cable damage:
Attention! Electric shock due to cable damage.
A fuse/circuit breaker will not always blow/trip if
the cable is cut through or damaged.
Î
Do not touch the cable before the mains plug
has been pulled out of the socket.
The trimmer starts
to vibrate excessi-
vely.
The drive is blocked or the bearing is defective.
Contact a specialist repair shop to arran-
ge inspection and, if necessary, repair of
the grass trimmer.
7KHOLQHEUHDNVRႇ
too frequently.
The line comes into contact too frequently with
¿[HGREMHFWVHJIHQFHVWUHHVHWF
Depending on the design, use the plant
protection bow.
Troubleshooting
WARNING!
Risk of injuries or material damage
¾ In case of doubt always consult a specialist workshop.
¾ %HIRUHDQ\LQVSHFWLRQRUDQ\ZRUNRQWKHGHYLFHVZLWFKWKHPRWRURႇDQGSXOORXWWKHSOXJ
Warranty
The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactu-
ring defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.
EC Declaration of Conformity
)XUWKHUGHWDLOVDERXWWKHGHYLFHDUHFRQWDL -
QHGRQWKHVHSDUDWHO\HQFORVHG(&'HFOD -
UDWLRQRI&RQIRUPLW\ZKLFKIRUPVSDUWRIWKLV
instruction manual.
Environmentally-friendly disposal
Power tools, accessories and packaging must be
routed to an environmentally sound recycling chain.
Do not throw your old power tool away
with the domestic waste. Take it to a
disposal facility.