Wolf Garten Lycos 40 M Series, Original Operating Instructions

Page: 22 / 179

Operation
22
EN
Attaching the middle handle
>
(Typ 2)
Î
Place the middle handle on the grass trimmer
$
.
Î
Fasten the middle handle with the hexagon screw
and the star screw to the grass trimmer
%
.
Note
0DNHVXUHWKHKHDGRIWKHKH[DJRQVFUHZ
¿WVFRUUHFWO\LQWKHUHFHVVRIWKHPLGGOH
handle.
Attaching the plant protection bow
@
(Typ 2)
The plant protection bow protects shrubs, trees and
bedding plants during trimming.
Î
Pull the plant protection bow apart slightly so that
it can be attached to the trimmer
$
.
Î
Insert the plant protection bow into the mounting
on the trimmer until it latches in
%
.
Note
During edge cutting the plant protection bow
PXVWEHWXUQHGWRWKHUHDUE\ƒ
Settings for operation
WARNING!
Risk of injuries posed by the
cutting tool.
¾ Only adjust the device with the motor
VZLWFKHGRႇDQGWKHFXWWLQJWRRODWD
standstill.
¾ Do not reach into the area of the rotating
line.
¾ Pull the mains plug before any work on
the device!
Setting the telescopic arm
7
The telescopic arm can be set to the user's height.
Î
Open the quick-release fastener
$
.
Î
Pull the telescopic arms apart or push them to-
gether until the ideal height is obtained
%
.
Î
Close the quick-release fastener
'
.
Setting the middle handle
;
(Typ 2)
The middle handle can be set for easier work at
various incline positions.
Î
Release the star screw on the middle handle
$
.
Î
Set the desired incline
%
.
Î
Retighten the star screw on the middle handle
'
.
Setting the working angle of the trimmer head
:
The trimmer head of the lawn trimmer can be set
WRGLႇHUHQWKRUL]RQWDOZRUNLQJDQJOHVIRUHDVLHU
working. This allows you to easily reach problematic
DQGGLႈFXOWWRDFFHVVSRVLWLRQVLQWKHJDUGHQ
Î
Press and hold the locating button
$
.
Î
Set the operating angle
%
.
Î
Release the locating button.
3
The head of the lawn trimmer engages audibly.
Setting the edge-cutting function
< 6
The edge cutting function enables precise trimming
along the lawn edge
<
.
Î
7XUQWKHSODQWSURWHFWLRQERZWRWKHUHDUE\ƒ
until it latches in
6 $
– only required for Typ 2.
Î
Press the locating button
6 %
while simultane-
RXVO\WXUQLQJWKHWULPPHUKHDGE\ƒWRWKH
left
6 '
.
Î
Release the locating button.
3
The trimmer head audibly engages.
Note
For normal trimming/cutting, the plant pro-
WHFWLRQERZ7\SVKRXOGEHWXUQHGE\ƒ
EDFNWRWKHIURQWWRSURWHFWWKHSODQWVDJDLQVW
the trimming line.
Operation
WARNING!
Risk of injuries posed by the
cutting tool.
¾ 6ZLWFKWKHPRWRURႇZDLWXQWLOWKHFXWWLQJ
tool comes to a standstill, and pull out
the mains plug before you perform
adjustments or other work to the device.
Operating times
Î
Observe the times stipulated in local byelaws.
Î
Check with your local authorities to determine if
there are any operating time limitations.
Guiding the cable through the strain relief
9
The strain relief in the control handle prevents acci-
dental disconnection of the extension cable.
Î
Fasten the extension cable in the strain relief as
shown.