manualshive.com logo in svg

wireless Seismic RT System 2, Deployment Manual

Share
Download
wireless Seismic RT System 2 Deployment Manual Download Page 90

90

RT System 2 v2.3 Deployment Guide

R01.i

© 2010-2014 Wireless Seismic, Inc. All rights reserved.

4. Point-to-Point Backhaul

Replacing a Radio

4.7 Replacing a Radio

Any number of environmental hazards could destroy an existing radio. When this happens, 
replace it using the following instructions: 

1

Identify the radio that needs to be replaced.

2

When the radio was initially configured for the point-to-point backhaul, a label was 
attached to the radio indicating which configuration file was used. Make a note of the 
configuration label (for example, 12:A-P12). 

3

Duplicate the configuration label and attach it to the replacement radio using the same 
information and color.

The following example label indicates a radio configured for the following:

Ɣ

Radio pair 12 

Ɣ

Access Point 

Ɣ

Pole 12

4

Locate the corresponding configuration file (for example, 12-AP.cfg) and upload it to the 
replacement radio according to step 4 on page 73 through step 13 on page 76.

5

Mark the faulty radio is so that it does not work its way back into the spread.

6

Replace the radio on the pole.

4.8 Upload New Firmware

This section describes how to upload new firmware into the radio. 

To upload new firmware:

ĺ

Windows computer 

ĺ

 Radio Configuration, System tab

1

Click Browse next to Upload Firmware and navigate to the supplied BIN file. 

2

Select the file and click Open.

3

Click Upload.

4

Click Update.

5

Do not power off the radio until the firmware is updated.

12:A-P12

White

Summary of Contents for RT System 2














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands