manualshive.com logo in svg

wireless Seismic RT System 2, Deployment Manual

Share
Download
wireless Seismic RT System 2 Deployment Manual Download Page 71

R01.i

RT System 2 v2.3 Deployment Guide

71

© 2010-2014 Wireless Seismic, Inc. All rights reserved.

4. Point-to-Point Backhaul

Preparation

i

United States frequencies (56-0035 US) – Operating frequency 5745 – 5825 MHz

i

International frequencies (56-0032 INTL) – Operating frequency 5470 – 5825 MHz

If you use an international configuration file with a United States radio, or a United States 
configuration file with an international radio, an error message is displayed:

The ability to modify the Country Code is disabled for radios that are configured for use in 
the United States and Canada. 

To discover and configure the radios:

ĺ

RT System 2 Windows computer

1

Verify that the configuration files for the radios and the discovery tool are on the 
RT System 2 Windows computer. The configuration files and the Ubiquiti Discovery 
Tool files are provided as a ZIP file. Extract the files if necessary. 

The file names are as follows:

NOTE

Operating outside of the allowed frequency range could result in sanctions by 
governmental regulatory agencies. Verify that all radios are correct for the 
market in which they will be used.

Figure 4–6  Invalid Country Code Error Message

TIP

Country codes are three-digit codes defined in ISO 3166-1. See the following for 
more information:

•

http://www.iso.org/iso/home/standards/country_codes.htm

• “H. Country Codes” on page 189

•

ubnt-discovery-
v2.3.bat

•

ubnt-discovery-
v2.3.jar

•

1-AP.cfg

•

7-AP.cfg

•

13-AP.cfg

•

1-S.cfg

•

7-S.cfg

•

13-S.cfg

•

2-AP.cfg

•

8-AP.cfg

•

14-AP.cfg

•

2-S.cfg

•

8-S.cfg

•

14-S.cfg

Summary of Contents for RT System 2














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands