manualshive.com logo in svg

wireless Seismic RT System 2, Deployment Manual

Share
Download
wireless Seismic RT System 2 Deployment Manual Download Page 2

To order additional copies of this document, send an email to your sales representative requesting the 
following:

i

Part Number: 90-0069-PDF

i

Part Number: 90-0069-Paper

Real Time Matters

Corporate Headquarters: 13100 Southwest Freeway, Suite 150 

x

 Sugar Land, TX 77478 USA 

x

 832-532-5080

Regional Office: 1172 West Century Drive, Suite 200 

x

 Louisville, CO 80027 USA 

x

 720-242-9916

[email protected] 

x

 www.wirelessseismic.com

© 2010-2014 Wireless Seismic, Inc. All rights reserved. 
All other brands, company names, product names, trademarks or service marks referenced in this material are the 

property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by Wireless 

Seismic, Inc.

Wireless Seismic, Inc.'s trademarks, registered trademarks or trade dress may not be used in connection with any 

product or service that is not the property of Wireless Seismic, Inc., in any manner that is likely to cause confusion 

among customers, or in any manner that disparages or discredits Wireless Seismic, Inc. The products and services 

described in this material may not be available in all regions.

All information supplied in this document regarding weights, sizes, performance, functionality and other technical 

information of any kind is approximate and shall be taken as generally representing our products. We may modify our 

products, discontinue products or add new products at any time and without providing an update to this document.

NOTHING CONTAINED IN THIS DOCUMENT SHALL BE CONSIDERED A REPRESENTATION OR WARRANTY MADE BY 

WIRELESS SEISMIC, INC. (“WIRELESS SEISMIC”) CONCERNING ANY PRODUCT DESCRIBED HEREIN, OR OTHERWISE. 

EXCEPT FOR THE WARRANTIES THAT MAY BE PROVIDED IN A SEPARATE AGREEMENT BETWEEN YOU AND WIRELESS 

SEISMIC, WIRELESS SEISMIC MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND AND NO WARRANTY, 

CONDITION OR REPRESENTATION, WHETHER EXPRESS, IMPLIED, ORAL OR STATUTORY, IS PROVIDED TO YOU OR 

ANY THIRD PARTY. WITHOUT LIMITING THE FOREGOING, WIRELESS SEISMIC EXPRESS EXCLUDES AND DISCLAIMS 

ANY WARRANTY, CONDITION OR REPRESENTATION: (1) OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 

PURPOSE, TITLE, SATISFACTORY QUALITY, OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE; 

(2) THAT ANY PRODUCTS (INCLUDING SOFTWARE) WILL BE FREE FROM INFRINGEMENT OR VIOLATION OF ANY 

RIGHTS, INCLUDING INTELLECTUAL PROPERTY RIGHTS, OF THIRD PARTIES; OR (3) THAT THE OPERATION OF ANY 

PRODUCT (INCLUDING SOFTWARE) WILL BE UNINTERRUPTED OR ERROR FREE. THIS DISCLAIMER AND EXCLUSION 

SHALL APPLY EVEN IF THE EXPRESS WARRANTIES HEREIN FAIL OF THEIR ESSENTIAL PURPOSE.

Summary of Contents for RT System 2














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands