R01.i
RT System 2 v2.3 Deployment Guide
83
© 2010-2014 Wireless Seismic, Inc. All rights reserved.
4. Point-to-Point Backhaul
Final Communication Test
b
Type
ubnt
in the User text box.
c
Type
ubnt
in the Password text box.
d
Type
443
in the Remote WEB Port text box.
e
The default test Direction is duplex; the test is performed for both transmit and
receive. If you want to run the test in only one direction, perform the following steps:
1) Select the Show Advanced Options check box.
2) Select transmit or receive.
f
Click Run Test.
g
Good Test Results are as follows:
Ź
RX (receive) only = 70+ Mbps
Ź
TX (transmit) only = 70+ Mbps
Ź
Total (duplex) = 90+ Mbps
–
RX = 40+ Mbps
–
TX = 40+ Mbps
7
If Speed Test results are low, use a systematic approach of testing links to identify the
offending radio pairs:
a
Log in to a Station (S) radio.
b
Click the Main tab and verify the following values:
Ź
Signal Strength < -75 dBm
Ź
Either the Vertical or Horizontal (Main Tab, Stations only) < -80 (between -65
and -75 is ideal)
Ź
Transmit CCQ < 90% (100% is ideal)
Ź
Click AP Information in the Monitor area. Verify that the Access Point Signal
Strength < -75 dBm
Figure 4–19 Speed Test Window
