manualshive.com logo in svg

wireless Seismic RT System 2, Deployment Manual

Share
Download
wireless Seismic RT System 2 Deployment Manual Download Page 135

RT System 2 v2.3

135 

Deployment Guide R01.i

© 2010-2014 Wireless Seismic, Inc. All rights reserved.

6

6.

Demobilization

6.1 Overview

This chapter describes how to prepare (undeploy) the ground electronics for transport at 
the end of a project (demobilization). 

6.2 Removing the WRU from the Field

This section describes the process to ready the WRU for movement to a new physical 
location or to remove it in preparation for demobilization.

To undeploy the WRU:

1

Prerequisites:

Ɣ

The WRU is assembled with battery, geophone, optional anchor plate, and 
antenna (and extender)

Ɣ

The WRU is in an active, transitional, or ready state

2

Optional: If the anchor plate is attached, remove the nails or stakes anchoring it to 
the ground.

3

Pick up the WRU and point the geophone connector end towards the sky as shown in 
the following figure. Within a few seconds, all of the LEDs illuminate:

Figure 6–1  Power Off the Unit

Summary of Contents for RT System 2














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands