manualshive.com logo in svg

wireless Seismic RT System 2, Deployment Manual

Share
Download
wireless Seismic RT System 2 Deployment Manual Download Page 136

136

RT System 2 v2.3 Deployment Guide

R01.i

© 2010-2014 Wireless Seismic, Inc. All rights reserved.

6. Demobilization

Disassemble the WRU

4

Within 5 seconds, place the unit flat in the transportation vehicle as shown in the 
following figure. The LEDs on the top of the unit turn off and then flash on briefly to 
indicate the WRU is undeployed and the unit shuts down.

5

Optional: Remove batteries, antenna, or geophone as described in “Disassemble the 
WRU” on page 136.

6.3 Disassemble the WRU 

This section describes the process to disassemble the WRU prior to demobilization.

To disassemble the WRU:

1

Undeploy the equipment as described in “Removing the WRU from the Field” on page 
135.

2

Remove the antenna (and extender) from the unit.

3

Remove the geophone from the unit.

4

Remove the batteries from the unit.

Ɣ

Press the catch on the battery latch.

Ɣ

Lift the lever, but do not lift the bail from the molded area on the battery.

Figure 6–2  Undeployed Unit

Summary of Contents for RT System 2














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands