manualshive.com logo in svg

wireless Seismic RT System 2, Deployment Manual

Share
Download
wireless Seismic RT System 2 Deployment Manual Download Page 125

R01.i

RT System 2 v2.3 Deployment Guide

125

© 2010-2014 Wireless Seismic, Inc. All rights reserved.

5. Point-to-Multipoint Backhaul

Final Communication Test

c

Repeat step a and step b for all of the radios.

10 If the individual links are all good but the backhaul as a whole does not deliver the 

appropriate throughput, it indicates that there is an interference problem. 

Contact Andy Prokop, Jerry Stair, or Mike Shilts for project-specific recommendations. 

11 If there are individual links with low numbers, perform the following steps to fix them:

a

Verify that the radios are pointing in the correct directions.

b

Verify that there are no frayed cables or cables with water intrusion.

c

Verify that shielding is properly installed. The following figure shows the radio/
antenna shielding: 

Figure 5–22  NanoStation Main Tab

Summary of Contents for RT System 2














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands